The vacuum's ability to create a map of its cleaning space is one of the commonly asked-for features. This map allows the robot to keep a record of the layout of the desired space. This can be used for different situations, for example the Roomba i1 Plus having the mapping feature can dedicate efficient cleaning in the mapped-out areas without accessing those that are not.
Shark AV2501S also has the mapping and navigation feature, navigation states how the robot vacuum moves around the cleaning area. Mapping and navigation often go hand in hand to help the vacuum move to the mapped-out spaces to be cleaned ignoring those that aren't. No-go zones is a feature found on many robot vacuum cleaners and Roomba i1 Plus supports this feature.
These zones are essentially digital boundaries or restricted spaces that you can set up to prevent the robot from entering specific areas or rooms during its cleaning cycle. Most modern robot vacuum cleaners such as the Roomba i1 Plus are built to work with Amazon Alexa, which implies that they can be integrated with the Amazon Echo ecosystem and programmed using voice commands. The Shark AV2501S can also work with Amazon Alexa, keep in mind that you will require an Alexa-enabled device such as an Echo speaker for voice control to work with Shark AV2501S.
The Roomba i1 Plus is compatible with Google Assistant, allowing you to control it using voice commands through Google Home devices or the Google Assistant app found on smartphones and tablets. The Shark AV2501S is compatible with Google Assistant, it's always essential to verify the level of compatibility with Google Assistant before buying a robot vacuum. The Roomba i1 Plus has a period of 1 year, this typically range from 1 year to 2 years, but some higher-end models may give longer warranties.
The Shark AV2501S, at 1 year
has the same warranty period as that of Roomba i1 Plus. When thinking of buying a robot vacuum cleaner, it's important to read and understand the warranty terms and conditions, alongside any limitations or exclusions that may apply. The Roomba i1 Plus's dustbin capacity is at 0.4L, dustbin capacity indicates how much dust, debris, and pet hair the robot vacuum holds before it needs to be emptied.
The Shark AV2501S, at 0.8L
has more capacity than the Roomba i1 Plus by 0.4L
The dustbin capacity varies widely among robot vacuum models, and the capcity you choose should depend on your cleaning needs and the size of the area you want to clean. Different floor types require a robot vacuum to be at a given ground clearance so as to optimize performance. The Roomba i1 Plus adjusts its height to match this requirement, for example, it may raise itself slightly when moving to a carpet to allow for effective suction, and then lower itself on hard floors to ensure the brushes make good contact.
Automatic height adjustment is commonly found in mid-range to high-end robot vacuum models such as the Shark AV2501S with sophiscated sensor technology and adaptability. This feature is essential for maintaining cleaning performance across various floor types, including carpets, rugs, hardwood floors, and tiles. Most robot vacuum cleaners are equipped with sensors and indicators to notify users when the dustbin is full and needs to be emptied.
Roomba i1 Plus supports this feature, which prevents the robot vacuum from getting clogged which means performance will be maintained as soon as the bin is emptied. Shark AV2501S also can indicate when its dustbin is full, for a robot vacuum to indicate that it's full can improve the convenience of owning one since it minimizes the need for constant monitoring. The Roomba i1 Plus weighs 4.7kg, robot vacuums are generally designed to be lightweight and compact to easily get around and portability.
Shark AV2501S, at 3.1kg
is lighter than the Roomba i1 Plus with a difference of 1.6kg. It's advisable to consider the weight of the vacuum when getting a model, and that's if you plan to carry it up and down stairs
Roomba i1 Plus has a width of 338mm, aslo known as its cleaning path width, refers to the width of the area that the robot vacuum can effectively clean in one go. The width of a robot vacuum is key as it can affect its efficiency and the duration it takes to clean a room
Shark AV2501S, at 348mm
measures more in width than the Roomba i1 Plus by 10mm.
A wider cleaning path can cover more ground in a single pass, reducing the time it takes to clean a room. Roomba i1 Plus's height measures 92mm, here you are looking at the measurement from the bottom of the robot vacuum to its highest point. Height is an important consideration, especially if you have obstacles with limited clearance in your home.
Shark AV2501S, at 104mm
measures more in height than the Roomba i1 Plus with a difference of 12mm. When choosing a robot vacuum, make sure that the robot vacuum can go under the furniture and navigate effectively in your living space without getting stuck or causing damage. The battery power of a robot vacuum cleaner is a crucial factor that determines how long the vacuum can run on a single charge.
Battery capacity is measured in milliampere-hours (mAh), Roomba i1 Plus's battery power is 1,800mAh
The Shark AV2501S, at mAh2,500
has more battery power than the Roomba i1 Plus with a difference of
A bigger capacity usually means longer battery life which can be beneficial if you have a large space or if you prefer the robot vacuum to complete cleaning cycles without frequent interruptions to recharge. The operating time of the Roomba i1 Plus refers to the amount of time the vacuum can clean continuously on a single charge before it needs to return to its charging dock for recharging. Roomba i1 Plus's operating time is 1.25h
Shark AV2501S, at 1.5h
lasts more than the Roomba i1 Plus by 0.25h
Always plan cleaning cycles around the vacuum's operating time to maximize efficiency and prevent "incomplete work" between charge intervals.
Roomba i1 Plus has a charge time of 2.5h, the charge time of a robot vacuum cleaner refers to the amount of time it takes for the vacuum's battery to recharge fully after it has been depleted during a cleaning cycle. The Shark AV2501S, at 4h
charges for longer than the Roomba i1 Plus with a difference of 1.5h. Charge time is an important factor to consider when choosing a robot vacuum, since it determines how long you'll need to wait before the vacuum is ready for its next cleaning cycle.
The operating power consumption of a robot vacuum cleaner refers to the amount of electrical power the vacuum uses while it's actively cleaning your home. Roomba i1 Plus has a power consumption of 28W, power is often measured in watts (W) and changes among different robot vacuum models based on several consuption factors. Roomba i1 Plus has a dirt sensor, dirt sensors are designed to detect the availability of dirt, dust, or debris in the room being cleaned and can be used to adjust the vacuum's cleaning behavior during cleaning cycle.
You may want to consider buying either the Shark AV2501S or Roomba i1 Plus If you value the ability to automatically adjust the cleaning modes of the robot vacuum based on the level of dirt and debris in your space. Self-emptying robot vacuum cleaners like the Roomba i1 Plus, are modern robot vacuum models that have a convenient feature to empty their dustbins automatically. Also, Shark AV2501S is self-emptying, have it in mind that self-emptying robot vacuums tend to be on the higher end of the price spectrum due to this advanced feature.
Problem area cleaning allows you to program a robot vacuum to focus on cleaning a particular spot in your home, the Roomba i1 Plus supports this, which can be really useful for dealing with localized messes or busy areas. The Shark AV2501S also supports problem area cleaning, the problem area cleaning feature is a convenient way to address specific area messes or high-traffic areas without running a full cleaning cycle for your entire space. Roomba i1 Plus supports a smartphone app, that allows you to control and monitor the vacuum remotely through your smartphone or tablet.
Both the Shark AV2501S and Roomba i1 Plus have mobile application support, mobile apps enhance the user experience by providing convenience, and ease update of features and functionalities. This feature in robot vacuum cleaners is designed to eliminate the likelihood of the robot vacuum becoming trapped while cleaning. Robot vacuums such as the Roomba i1 Plus are equipped with various sensors and technologies to move around obstacles and avoid getting stuck, however the effectiveness of this feature can vary among different models.
Both the Shark AV2501S and Roomba i1 Plus have the "anti-stuck" feature, however clearing clutter, ensuring proper cable management, and creating clear paths for the vacuums helps to further eliminate the chances of becoming stuck while cleaning. These virtual barriers are typically set up and controlled via the robot vacuum's mobile app, similar to no-go zones, these barriers are setup to enable you control and restrict where the robot vacuum can and cannot go while cleaning. Both Roomba i1 Plus and Shark AV2501S support virtual barriers, the ability to set virtual barriers is mostly useful for spaces with areas where the robot vacuum may encounter obstacles.
Roomba i1 Plus has a route mapping feature which enables it to generate a map of your home and schedule efficient cleaning routes. This mapping capability enhances the vacuum's ability to clean effectively and systematically. Route mapping is an important feature as it makes it possible for robot vacuums such as the Shark AV2501S to adapt to the layout of your space to work more efficiently and minimize the chance of missing certain spots.
Voice prompts refer to audible messages that the vacuum states to provide you information on the different states of the vacuum. Roomba i1 Plus supports this feature
Shark AV2501S also supports voice prompts, this feature can be useful for you who like audible notifications or users who have visual impairments. Auto-docking is a feature in robot vacuum cleaners that refers to the vacuum's ability to return to its docking station when predetermined conditions are met such as done with cleaning, battery running low, or any malfunction.
Both Shark AV2501S and Roomba i1 Plus support this feature, considered a convenient feature because it makes sure that the robot vacuum keeps its charge and readiness for cleaning without requiring manual intervention. Modern robot vacuum cleaners such as Roomba i1 Plus come having an "anti-fall" feature. This feature is designed to save the robot vacuum from falling off stairs, ledges, or other elevated surfaces, ensuring its safety while cleaning.
This safety feature that is also available on the Shark AV2501S is essential in preventing accidents and keeping the robot vacuum from damage. It gives you peace of mind by ensuring that the vacuum will not fall down a flight of stairs during its cleaning cycle. Roomba i1 Plus has this convenient feature, which enables you to set specific days or times of day for the robot vacuum to automatically start cleaning your space.
This feature in robot vacuums is particularly useful in keeping a consistently clean space without the need for manual intervention. Shark AV2501S too can be scheduled. Roomba i1 Plus supports Wi-Fi, Wi-Fi-enabled robot vacuums offer several advantages and features, such as remote control, mobile app integration, voice assistant compatibility, and remote monitoring.
Also, Shark AV2501S supports Wi-Fi, Wi-Fi connectivity improves the convenience and flexibility of robot vacuum use, allowing for more efficient and customized cleaning routines.
