The robot vacuum's ability to create a digital map of its cleaning area is one of the commonly asked-for features. This map allows the robot to "understand" the layout of the space. This can be used for different situations, for example the Roomba i1 Plus having the mapping feature can provide efficient cleaning in the mapped-out areas without accessing those that are not.
The Roborock S7 MaxV Ultra also has the mapping and navigation feature, navigation involves how the robot vacuum moves around the cleaning area. Mapping and navigation often go hand in hand to help the vacuum move to the mapped-out areas to be cleaned leaving out those that aren't. No-go zones is a feature of many robot vacuum cleaners and Roomba i1 Plus is one of them.
These zones are essentially digital boundaries or restricted spaces that you can set up preventing the robot from accessing specific areas or rooms during its cleaning cycle. The Roborock S7 MaxV Ultra also supports the no-go zones feature, such a feature is particularly useful in rooms where there are locations that you want to restrict access to the robot vacuum. Most modern robot vacuum cleaners such as the Roomba i1 Plus are designed to work with Amazon Alexa, which implies that they can be added to the Amazon Echo ecosystem and controlled using voice commands.
The Roborock S7 MaxV Ultra can also work with Amazon Alexa, keep in mind that you will need an Alexa-enabled device such as an Echo speaker for voice control to work with your robot vacuum. The Roomba i1 Plus is compatible with Google Assistant, allowing you to control it using voice commands via Google Home devices or the Google Assistant app installed on smartphones and tablets. The Roborock S7 MaxV Ultra too is compatible with Google Assistant, it's always essential to verify the level of compatibility with Google Assistant before purchasing a robot vacuum.
The Roomba i1 Plus has a period of 1 year, this typically range from 1 - 2 years, however some higher-end models may give longer warranties. Roborock S7 MaxV Ultra, at 1 year
has the same warranty period as that of Roomba i1 Plus. When thinking of buying a robot vacuum cleaner, it's important to read and understand the warranty terms and conditions, as well as any limitations or exclusions that may apply.
Roomba i1 Plus's dustbin capacity is at 0.4L, dustbin capacity indicates how much dust, dirt, and pet hair the robot vacuum can hold before it needs to be emptied. Roborock S7 MaxV Ultra, at 0.4L
has the same dustbin capacity as the Roomba i1 Plus
The dustbin capacity can vary widely among robot vacuum models, and the size you choose should be based on your cleaning needs and the size of the area you want to clean. Different floor types require a robot vacuum to be at a given ground clearance so as to optimize performance.
The Roomba i1 Plus can adjust its height to match this requirement, for example, it may raise itself slightly when moving to a carpet to enable effective suction, and then lower itself on hard floors to ensure the brushes make good contact. Automatic height adjustment is commonly found in mid-range to high-end robot vacuum models such as the Roborock S7 MaxV Ultra with better sensor technology and adaptability. This feature is essential for maintaining cleaning performance across various floor types, including carpets, rugs, hardwood floors, and tiles.
Many robot vacuum cleaners are equipped with sensors and indicators to notify users when the dustbin is full and needs to be emptied. Roomba i1 Plus supports this feature, which prevents the robot vacuum from getting clogged which means performance will be maintained as soon as the bin is emptied. Roborock S7 MaxV Ultra also can indicate when its dustbin is full, for a robot vacuum to alert that it's full can improve the convenience of owning one since it minimizes the need for constant monitoring.
The Roomba i1 Plus weighs 4.7kg, robot vacuums are generally designed to be lightweight and compact to easily get around and carrying around. The Roborock S7 MaxV Ultra, at 4.8kg
weighs more than the Roomba i1 Plus by 0.1kg. It's advisable to take in consideration the weight of the vacuum when choosing a model, especially if you plan to carry it up and down stairs
Roomba i1 Plus has a width of 338mm, often referred to as its cleaning path width, refers to the width of the area that it can effectively clean in one go.
The width of a robot vacuum is key as it can affect its efficiency and the time it takes to clean a space
The Roborock S7 MaxV Ultra, at 350mm
measures more in width than the Roomba i1 Plus by 12mm. A wider cleaning path can cover more ground in a single pass, reducing the time it takes to clean a room. Roomba i1 Plus's height measures 92mm, here you are considering the measurement from the bottom to its highest point.
Height is a key consideration, especially if you have obstacles with low clearance in your home. Roborock S7 MaxV Ultra, at 97mm
measures more in height than the Roomba i1 Plus by 5mm. When choosing a robot vacuum, make sure that the robot vacuum can fit under the furniture and navigate effectively in your living space without getting stuck or causing damage.
The battery power of a robot vacuum cleaner is important as it determines how long the vacuum can operate on a single charge. It is measured in milliampere-hours (mAh), Roomba i1 Plus's battery power is 1,800mAh
Roborock S7 MaxV Ultra, at mAh5,200
has more battery power than the Roomba i1 Plus by
A bigger capacity implies longer battery life which can be beneficial if you have a large home or if you would like the robot vacuum to complete cleaning cycles without frequent interruptions to recharge. The operating time of the Roomba i1 Plus refers to the time the vacuum can clean continuously on a single battery charge before it needs to return to its charging dock for recharging.
Roomba i1 Plus's operating time is 1.25h
Roborock S7 MaxV Ultra, at 3h
lasts more than the Roomba i1 Plus by 1.75h
Always plan cleaning cycles around the vacuum's operating time to maximize efficiency and prevent "incomplete work" between charge intervals. Roomba i1 Plus has a charge time of 2.5h, the charge time of a robot vacuum cleaner refers to the amount of time it takes for the vacuum's battery to recharge fully after it has been depleted during a cleaning cycle. Roborock S7 MaxV Ultra, at 4h
charges for longer than the Roomba i1 Plus with a difference of 1.5h.
Charge time is an important factor to consider when choosing a robot vacuum, as it determines how long you'll need to wait before the vacuum begins its next cleaning cycle. The operating power consumption of a robot vacuum cleaner refers to the amount of electrical power the vacuum uses while it's actively cleaning your home. Roomba i1 Plus has a power consumption of 28W, power is often measured in watts (W) and changes among different robot vacuum models based on several consuption factors.
Roborock S7 MaxV Ultra, at 74W
consumes more power than the Roomba i1 Plus with a difference of 46W. Lower power consumption is more energy-efficient and cost-effective over time, but it may also affect cleaning performance, especially on carpets. Roomba i1 Plus has a dirt sensor, these are designed to detect the availability of dirt, dust, or debris in the room being cleaned and can be used to adjust the vacuum's cleaning behavior during operation.
Self-emptying robot vacuum cleaners like the Roomba i1 Plus, are advanced robot vacuum models that have the ease of use feature to empty their dustbins automatically. Also, Roborock S7 MaxV Ultra is self-emptying, have it in mind that self-emptying robot vacuums tend to be on the higher end of the price spectrum due to this advanced feature. Problem area cleaning allows you to command a robot vacuum to focus on cleaning a specific area in your home, the Roomba i1 Plus supports this, which can be particularly useful for addressing particular area messes or busy areas.
Roborock S7 MaxV Ultra also supports problem area cleaning, the spot cleaning feature is a convenient way to deal with specific area messes or high-traffic areas without running a full cleaning cycle for your entire space. Roomba i1 Plus supports a smartphone app, that allows you to control and monitor the vacuum without getting to it physically but through your smartphone or tablet. Both the Roborock S7 MaxV Ultra and Roomba i1 Plus have mobile application support, mobile apps enhance the user experience by providing convenience, and ease update of features and functionalities.
This feature in robot vacuum cleaners is intended to reduce the likelihood of the robot vacuum becoming stuck during cleaning. Robot vacuums such as the Roomba i1 Plus are equipped with various sensors and technologies to navigate around obstacles and avoid getting stuck, however the effectiveness of this feature varies among different models. Both the Roborock S7 MaxV Ultra and Roomba i1 Plus have the "anti-stuck" feature, but clearing clutter, ensuring proper cable management, and creating clear paths for the vacuums helps to further eliminate the chances of getting stuck during cleaning.
These virtual barriers are set up and managed via the robot vacuum's mobile app, similar to no-go zones, these barriers are designed to help you control and restrict where the robot vacuum can and cannot go while cleaning. Both Roomba i1 Plus and Roborock S7 MaxV Ultra support virtual barriers, this ability to set virtual barriers is especially useful for homes with areas where the robot vacuum may encounter obstacles. Roomba i1 Plus has a route mapping feature that enables it to generate a map of your home and schedule efficient cleaning routes.
This mapping capability enhances the vacuum's ability to work effectively and systematically. Route mapping is an important feature as it makes it possible for robot vacuums such as the Roborock S7 MaxV Ultra to adapt to the layout of your home to clean more efficiently and minimize the chance of missing certain spots. Voice prompts are notifications that the vacuum states to provide you information on the different states of the vacuum.
Roomba i1 Plus has this feature
The Roborock S7 MaxV Ultra also supports voice prompts, this feature can be useful for you who prefer audible notifications or users who have visual impairments. Auto-docking is a feature that indicates the vacuum's ability to autonomously return to its docking station when certain conditions are met such as getting work done, battery running low, or any malfunction. Both Roborock S7 MaxV Ultra and Roomba i1 Plus support this feature, considered a convenient feature because it ensures that the robot vacuum keeps its charge and readiness for cleaning with little or no manual intervention.
Most robot vacuum cleaners such as Roomba i1 Plus come equipped with an "cliff detection" feature. This feature is intended to save the robot vacuum from falling off stairs, ledges, or other elevated surfaces, thus its safety while cleaning. This safety feature that is also available on the Roborock S7 MaxV Ultra is key in mitigating accidents and keeping the robot vacuum from damage.
It gives you peace of mind by ensuring that the vacuum will not fall down a flight of stairs during its cleaning cycle. Roomba i1 Plus has this convenient feature, which allows you to set specific days or times of day for the robot vacuum to start working. This feature in robot vacuums is particularly useful in keeping a consistently clean space without the need for manual intervention.
Roborock S7 MaxV Ultra too can be scheduled. Roomba i1 Plus supports Wi-Fi, Wi-Fi-enabled robot vacuums offer several advantages and features, such as remote control, mobile app integration, voice assistant compatibility, and remote monitoring. Also, Roborock S7 MaxV Ultra supports Wi-Fi, Wi-Fi connectivity enhances the convenience and flexibility of robot vacuum use, allowing for more efficient and customized cleaning routines.
