Roborock S6 can clean all floor types, this feature comes in handy, as different rooms inside your home may have different types of flooring i.e. carpets. When a robot vacuum cleaner is advertised able to clean all floor types, it implies that the robot vacuum is capable to effectively clean most flooring materials without much significant issues.
Roomba j7+ can also clean all floor types, this means that it too is designed to be adaptable, providing best cleaning performance on either hard floors or carpets found in most homes. Roborock S6 has an obstacle sensor, such a sensor serves the purpose of detecting and identifying objects in the robot's way, this allwos it to navigate around them and avoid collisions. Also, the Roomba j7+ has this sensor, obstacle sensors work together to provide the robot vacuum with a better understanding of its surroundings, enabling it to navigate around furniture, walls, and other objects when cleaning a room thus avoiding damage to both the robot and its obstacles.
No-go zones is a feature found on many advanced robot vacuum cleaners and Roborock S6 supports this feature. These zones are basicaaly digital boundaries or restricted areas that you can set up preventing the robot from accessing specific areas or rooms during its cleaning cycle. Most modern robot vacuum cleaners such as the Roborock S6 are built to work with Amazon Alexa, which means that they can be added to the Amazon Echo ecosystem and programmed using voice commands.
The Roomba j7+ can also work with Amazon Alexa, keep in mind that you will require an Alexa-enabled device such as an Echo speaker for voice control to work with Roomba j7+.
The Roborock S6 is compatible with Google Assistant, allowing you to control it using voice commands via Google Home devices or the Google Assistant app installed on smartphones and tablets. The Roomba j7+ is compatible with Google Assistant, it's always essential to verify the level of compatibility with Google Assistant before buying a robot vacuum. Roborock S6 has a period of 1 year, this typically range from 1 - 2 years, however some higher-end models may give longer warranty periods.
Roomba j7+, at 1 year
has the same warranty period as that of Roborock S6. When considering a robot vacuum cleaner, it's essential to read and understand the warranty terms and conditions, alongside any limitations or exclusions that may apply. Roborock S6's dustbin capacity is at 0.5L, dustbin capacity indicates how much dust, dirt, and pet hair the robot vacuum can hold before it can be emptied.
The Roomba j7+, at 0.4L
carries less dirt than the Roborock S6 with a difference of only 0.1L
The dustbin capacity can vary widely among robot vacuum models, and the size you choose should be based on your cleaning needs and the size of the area you want to clean. Different floor types require a robot vacuum to be at a given ground clearance so as to optimize performance. The Roborock S6 adjusts its height to match this demand, for example, it may raise itself slightly when transitioning to a carpet to allow for effective suction, and then lower itself on hard floors to make sure the brushes make good contact.
Roborock S6 weighs 3.6kg, robot vacuums are commonly designed to be lightweight and compact to easily get around and carrying around. Roomba j7+, at 3.3kg
is lighter than the Roborock S6 by 0.3kg. It's advisable to take in consideration the weight of the vacuum when selecting a model, and that's if you plan to carry it up and down stairs
Roborock S6 has a width of 350mm, often referred to as its cleaning path width, refers to the width of the area that the robot vacuum can effectively clean in a single pass.
The width of a robot vacuum is key as it can affect its efficiency and the duration it takes to clean a room
Roomba j7+, at 330mm
measures less in width than the Roborock S6 with a difference of 20mm. A wider cleaning path can cover more ground in a single pass, shortening the time it takes to clean a room. Roborock S6's height measures 97mm, here you are considering the measurement from the bottom of the robot vacuum to its highest point.
Height is a key consideration, especially if you have obstacles with limited clearance in your home. Roomba j7+, at 92mm
measures less in height than the Roborock S6 with a difference of 5mm. When selecting a robot vacuum, make sure that the robot vacuum can fit under the furniture and navigate effectively in your living space without getting stuck or causing damage.
The battery power of a robot vacuum cleaner is a crucial factor that determines how long the vacuum can run on a single charge. It is measured in milliampere-hours (mAh), Roborock S6's battery power is 5,200mAh
Roomba j7+, at mAh2,210
has less battery power than the Roborock S6 by only
A bigger capacity implies longer battery life which can be of advantage if you have a large space or if you prefer the robot vacuum to complete cleaning cycles without frequent interruptions to recharge. The operating time of a robot vacuum cleaner refers to the time the vacuum can clean continuously on a single charge before it needs to return to its charging dock for recharging.
Roborock S6's operating time is 3h
The Roomba j7+, at 1.25h
spends less time than the Roborock S6 by only 1.75h
Always plan cleaning cycles around the vacuum's operating time to maximize efficiency and prevent "incomplete work" between charge intervals. This is the amount of electrical power the vacuum uses while it's actively cleaning your home. Roborock S6 has a power consumption of 58W, power is often measured in watts (W) and changes among different robot vacuum models based on several consuption factors.
That's right, most modern robot vacuum cleaners have the capability to mop floors in addition to vacuuming. Such robot vacuums are often referred to as robot vacuum with mopping function models and Roborock S6 is one of those robot vacuums
Roborock S6 has a dirt sensor, these are designed to detect the availability of dirt, dust, or debris in the room being cleaned and can be used to adjust the vacuum's cleaning behavior during cleaning cycle. Roborock S6 supports a smartphone app, through which you can control and monitor the vacuum remotely through your smartphone or tablet.
Both the Roomba j7+ and Roborock S6 have mobile application support, mobile apps enhance your experience by providing convenience, and ease update of features and functionalities. This feature in robot vacuum cleaners is designed to eliminate the likelihood of the robot vacuum becoming stuck while cleaning. Robot vacuums such as the Roborock S6 are equipped with various sensors and technologies to navigate around obstacles and avoid getting stuck, but the effectiveness of this feature can vary among different models.
Both the Roomba j7+ and Roborock S6 have the "anti-stuck" feature, but clearing clutter, ensuring proper cable management, and creating clear paths for the vacuums helps to further reduce the chances of becoming stuck during cleaning. Virtual barriers are typically set up and managed through the robot vacuum's mobile app, similar to no-go zones, these barriers are setup to enable you control and restrict where the robot vacuum can and cannot go during cleaning. Both Roborock S6 and Roomba j7+ support virtual barriers, this ability to set virtual barriers is especially useful for spaces with areas where the robot vacuum may encounter obstacles.
Roborock S6 has a route mapping feature which enables it to generate a map of your space and schedule efficient cleaning routes. This mapping capability enhances the vacuum's ability to clean effectively and systematically. Route mapping is an important feature as it enables robot vacuums such as the Roomba j7+ to adapt to the layout of your space to clean more efficiently and reduce the chance of missing certain spots.
Voice prompts refer to notifications that the vacuum emits to give you alerts on the different states of the vacuum. Roborock S6 supports this feature
Roomba j7+ also supports voice prompts, this feature is useful for you who prefer audible notifications or users who have visual impairments. Most robot vacuum cleaners such as Roborock S6 come equipped with an "cliff detection" feature.
This feature is designed to prevent the robot vacuum from falling off stairs, ledges, or other elevated surfaces, ensuring its safety while cleaning. This safety feature that is also available on the Roomba j7+ is essential in preventing accidents and protecting the robot vacuum from damage. It gives you peace of mind by ensuring that the vacuum will not fall down a flight of stairs during its cleaning cycle.
Roborock S6 has this convenient feature, which allows you to set certain days or times of day for the robot vacuum to start working. This feature in robot vacuums is specifically useful in keeping a consistently clean home with little or no manual intervention. Roomba j7+ too allows scheduling.
