iRobot Roomba 770 cleans all floor types, this feature is essential, since different rooms within a home may have various types of flooring i.e. carpets. When a robot vacuum cleaner is stated as being able to clean all floor types, it implies that the robot vacuum is designed and equipped to effectively clean most flooring materials without much limitations.
Roborock S6 can also clean all floor types, meaning it is designed to be versatile, providing best cleaning results on either hard floors or carpets found in most homes. iRobot Roomba 770 has an obstacle sensor, this serves the purpose of detecting and identifying objects in the robot's route, this allwos it to navigate around them thus avoiding collisions. Also, the Roborock S6 has an obstacle sensor, obstacle sensors work together to provide the robot vacuum with a comprehensive understanding of its surroundings, making it possible to navigate around furniture, walls, and other objects when cleaning a room thus preventing damage to both the robot and its obstacles.
The iRobot Roomba 770 has 3 cleaning modes, the cleaning modes supported by robot vacuum cleaners can vary depending on the design of the robot vacuum. The iRobot Roomba 770 has a period of 1 year, warranty periods for robot vacuums typically range from 1 year to 2 years, however some higher-end brands may give longer warranty periods. Roborock S6, at 1 year
has the same warranty period as that of iRobot Roomba 770.
When thinking of buying a robot vacuum cleaner, it's important to read and understand the warranty terms and conditions, alongside any limitations or exclusions that may apply. iRobot Roomba 770's dustbin capacity is at 0.5L, dustbin capacity determines how much dust, dirt, and pet hair the vacuum holds before it can be emptied. The Roborock S6, at 0.5L
has the same dustbin capacity as the iRobot Roomba 770
The dustbin capacity can vary widely among different robot vacuum models, and the size you choose should be based on your cleaning needs and the size of the area you want to clean.
Different floor types require a robot vacuum to be at a given ground clearance so as to optimize performance. The iRobot Roomba 770 adjusts its height to match this requirement, for example, it may raise itself slightly when moving to a carpet to enable effective suction, and then lower itself on hard floors to make sure the brushes make good contact. Automatic height adjustment is commonly found in mid-range to high-end robot vacuum models such as the Roborock S6 with advanced sensor technology and adaptability.
This feature is essential for keeping up cleaning performance across various floor types, including carpets, rugs, hardwood floors, and tiles. The iRobot Roomba 770 weighs 3.8kg, robot vacuums are generally designed to be lightweight and compact to easily get around and carrying around. Roborock S6, at 3.6kg
is lighter than the iRobot Roomba 770 by 0.2kg.
It's important to take in consideration the weight of the vacuum when choosing a model, especially if you plan to carry it up and down stairs
iRobot Roomba 770 has a width of 353mm, aslo known as its cleaning path width, refers to the width of the area that the robot vacuum can properly clean in a single pass. The width of a robot vacuum is key as it can affect its efficiency and the duration it takes to clean a space
The Roborock S6, at 350mm
measures less in width than the iRobot Roomba 770 by 3mm. A wider cleaning path can cover more ground in a single pass, shortening the time it takes to clean a room.
iRobot Roomba 770's height measures 91mm, here you are looking at the measurement from the bottom of the robot vacuum to its highest point. Height is an important consideration, especially if you have obstacles with limited clearance in your home. The Roborock S6, at 97mm
measures more in height than the iRobot Roomba 770 by 6mm.
When selecting a robot vacuum, ensure that the robot vacuum can fit under the furniture and navigate effectively in your living space without getting stuck or causing damage. The operating time of a robot vacuum cleaner refers to the time the vacuum can clean continuously on a single battery charge before it needs to be recharged. iRobot Roomba 770's operating time is 2h
Roborock S6, at 3h
lasts more than the iRobot Roomba 770 with a difference of 1h
Always plan cleaning cycles around the vacuum's operating time to maximize efficiency and prevent "incomplete work" between charge intervals.
iRobot Roomba 770 has a charge time of 3h, the charge time of a robot vacuum cleaner refers to the amount of time it takes for the vacuum's battery to recharge fully after it has been depleted during a cleaning cycle. The operating power consumption of a robot vacuum cleaner refers to the amount of electrical power the vacuum uses while it's actively cleaning your home. iRobot Roomba 770 has a power consumption of 30W, power is typically measured in watts (W) and can vary among different robot vacuum models based on several consuption factors.
The Roborock S6, at 58W
consumes more power than the iRobot Roomba 770 by 28W. Lower power consumption can be more energy-efficient and cost-effective over time, but it may also affect cleaning performance, especially on carpets. iRobot Roomba 770 has a dirt sensor, these are designed to detect the concentration of dirt, dust, or debris in the room being cleaned and based on their readings adjust the vacuum's cleaning behavior during operation.
You may want to consider buying either the Roborock S6 or iRobot Roomba 770 If you value the ability to automatically adjust the cleaning modes of the robot vacuum based on the level of dirt and debris in your space. This feature in robot vacuum cleaners is designed to eliminate the chance of the robot vacuum getting trapped while cleaning. Robot vacuums such as the iRobot Roomba 770 are equipped with various sensors and technologies to navigate around obstacles and avoid getting stuck, however the effectiveness of this feature can vary among different models.
Both the Roborock S6 and iRobot Roomba 770 have the "anti-stuck" feature, but clearing clutter, ensuring proper cable management, and creating clear paths for the vacuums helps to further reduce the chances of getting stuck during cleaning. These virtual barriers are set up and managed through the robot vacuum's mobile app, similar to no-go zones, these barriers are designed to help you control and restrict where the robot vacuum can and cannot go during cleaning. Both iRobot Roomba 770 and Roborock S6 support virtual barriers, the ability to set virtual barriers is mostly useful for homes having areas where the robot vacuum may encounter obstacles.
Auto-docking is a feature in robot vacuum cleaners that indicates the vacuum's ability to return to its docking station when certain conditions are met such as getting work done, battery running low, or any malfunction. Most robot vacuum cleaners such as iRobot Roomba 770 come equipped with an "cliff detection" feature. This feature is intended to prevent the robot vacuum from falling off stairs, ledges, or other elevated surfaces, ensuring its safety while cleaning.
This safety feature that is also available on the Roborock S6 is key in preventing accidents and protecting the robot vacuum from damage. It gives you peace of mind knowing that the vacuum will not fall down a flight of stairs during its cleaning cycle. iRobot Roomba 770 has this convenient feature, which enables you to set certain days or times of day for the robot vacuum to automatically start working.
The scheduling feature in robot vacuums is specifically useful in maintaining a consistently clean home without the need for manual intervention. Roborock S6 too allows scheduling. iRobot Roomba 770 has a remote control, allowing you to control the vacuum's direction and functions from a distance.
