iRobot Roomba 770 cleans all floor types, this comes in handy, since different rooms inside a home may have different types of flooring i.e. carpets. When a robot vacuum cleaner is advertised able to clean all types of floors, this implies that the vacuum is designed and equipped to clean several flooring materials without much limitations.
iRobot Roomba 770 has an obstacle sensor, this serves the purpose of detecting and identifying obstacles in the robot's route, allowing it to navigate around them and avoid collisions. Also, the iRobot Roomba 698 has an obstacle sensor, obstacle sensors work together to provide the robot vacuum with a comprehensive understanding of its environment, enabling it to navigate around furniture, walls, and other objects when cleaning a room and avoiding damage to both the robot and its obstacles. iRobot Roomba 770 has 3 cleaning modes, the cleaning modes supported by robot vacuum cleaners can vary depending on the design of the robot vacuum.
iRobot Roomba 770 has a period of 1 year, this typically range from 1 - 2 years, but some higher-end brands may give longer warranty periods. iRobot Roomba 698, at 2 year
has a longer warranty period than the iRobot Roomba 770 by 1 year. When considering a robot vacuum cleaner, it's important to read and understand the warranty terms and conditions, as well as any limitations or exclusions that may apply.
iRobot Roomba 770's dustbin capacity is at 0.5L, dustbin capacity indicates how much dust, dirt, and pet hair the robot vacuum can hold before it requires to be emptied. iRobot Roomba 698, at 0.6L
has more capacity than the iRobot Roomba 770 by 0.1L
The dustbin capacity varies widely among different robot vacuum models, and the size you choose should depend on your cleaning needs and the size of the area you want to clean. Different floor types require a robot vacuum to be at a given ground clearance so as to optimize performance.
The iRobot Roomba 770 adjusts its height to match this demand, for example, it may raise itself slightly when transitioning to a carpet to enable effective suction, and then lower itself on hard floors to make sure the brushes make good contact. The iRobot Roomba 770 weighs 3.8kg, robot vacuums are generally designed to be lightweight and compact to easily get around and portability. The iRobot Roomba 698, at 3kg
is lighter than the iRobot Roomba 770 by 0.8kg.
It's important to take in consideration the weight of the robot vacuum when getting a model, and that's if you plan to carry it up and down stairs
iRobot Roomba 770 has a width of 353mm, aslo known as its cleaning path width, refers to the width of the area that it can effectively clean in a single pass. The width of a robot vacuum is important as it can affect its efficiency and the duration it takes to clean a room
iRobot Roomba 698, at 340mm
measures less in width than the iRobot Roomba 770 with a difference of 13mm. A wider cleaning path can cover more ground in a single pass, shortening the time it takes to clean a room.
iRobot Roomba 770's height measures 91mm, here you are considering the measurement from the bottom to its highest point. Height is a key consideration, especially if you have obstacles with limited clearance in your home. The iRobot Roomba 698, at 92mm
measures more in height than the iRobot Roomba 770 by 1mm.
When choosing a robot vacuum, make sure that the robot vacuum can go under the furniture and navigate effectively in your living space without getting stuck or causing damage. The operating time of a robot vacuum cleaner refers to the amount of time the vacuum can clean continuously on a single battery charge before it needs to be recharged. iRobot Roomba 770's operating time is 2h
The iRobot Roomba 698, at 1.5h
spends less time than the iRobot Roomba 770 with a difference of only 0.5h
Always plan cleaning cycles around the vacuum's operating time to maximize efficiency and prevent "incomplete work" between charge intervals.
iRobot Roomba 770 has a charge time of 3h, the charge time of a robot vacuum cleaner refers to the amount of time it takes for the vacuum's battery to recharge fully after it has been depleted during a cleaning cycle. iRobot Roomba 698, at 2h
spends lesser time charging than the iRobot Roomba 770 with a difference of only 1h. Charge time is an important factor to consider when choosing a robot vacuum, since it determines how long you'll need to wait before the vacuum is ready for its next cleaning cycle.
The operating power consumption of a robot vacuum cleaner refers to the amount of electrical power the vacuum uses while it's actively cleaning your home. iRobot Roomba 770 has a power consumption of 30W, power is measured in watts (W) and changes among different robot vacuum models based on several consuption factors. iRobot Roomba 770 has a dirt sensor, these are designed to detect the concentration of dirt, dust, or debris in the room being cleaned and can be used to adjust the vacuum's cleaning behavior during cleaning cycle.
You may want to consider buying either the iRobot Roomba 698 or iRobot Roomba 770 If you prefer the ability to automatically adjust the cleaning modes of the robot vacuum based on the level of dirt and debris in your room. This feature in robot vacuum cleaners is designed to reduce the chance of the robot vacuum getting stuck during cleaning. Robot vacuums such as the iRobot Roomba 770 are equipped with various sensors and technologies to navigate around obstacles and avoid getting trapped, but the effectiveness of this feature can vary among different models.
Both the iRobot Roomba 698 and iRobot Roomba 770 have the "anti-stuck" feature, however clearing clutter, ensuring proper cable management, and creating clear paths for the vacuums helps to further eliminate the chances of becoming stuck during cleaning. Virtual barriers are set up and managed through the robot vacuum's mobile app, similar to no-go zones, these barriers are designed to help you control and restrict where the robot vacuum can and cannot go while cleaning. Both iRobot Roomba 770 and iRobot Roomba 698 support virtual barriers, the ability to set virtual barriers is especially useful for homes with areas where the robot vacuum may become stuck.
Auto-docking is a feature that refers to the vacuum's ability to return to its docking station when predetermined conditions are met such as done with cleaning, battery running low, or any malfunction. Modern robot vacuum cleaners such as iRobot Roomba 770 come having an "anti-fall" feature. This feature is intended to prevent the robot vacuum from falling off stairs, ledges, or other elevated surfaces, hence its safety while cleaning.
This safety feature that is also available on the iRobot Roomba 698 is key in avoiding accidents and keeping the robot vacuum from damage. It gives you peace of mind by ensuring that the vacuum will not fall down a flight of stairs during its cleaning cycle. iRobot Roomba 770 has this convenient feature, which allows you to set specific days or times of day for the robot vacuum to automatically start cleaning your home.
This feature in robot vacuums is particularly useful in maintaining a consistently clean home without the need for manual intervention. iRobot Roomba 698 too allows scheduling. iRobot Roomba 770 has a remote control, allowing you to manually control the vacuum's movements and actions from a distance.
