iRobot Roomba 630 cleans all floor types, this feature comes in handy, as different rooms inside a home may have different types of flooring i.e. carpets. When a robot vacuum is stated able to clean all floor types, this means that the robot vacuum is designed and equipped to clean several flooring materials without much limitations.
Roborock S6 can also clean all floor types, this means that it too is designed to be adaptable, providing effective cleaning performance on either carpets or hard floors commonly found in homes. The iRobot Roomba 630 has 3 cleaning modes, the cleaning modes supported by robot vacuums varies widely depending on the design of the robot vacuum. iRobot Roomba 630 has a period of 1 year, warranty periods typically range from 1 year to 2 years, however some higher-end models may give longer warranties.
The Roborock S6, at 1 year
has the same warranty period as that of iRobot Roomba 630. When considering a robot vacuum cleaner, it's important to read and understand the warranty terms and conditions, as well as any limitations or exclusions that may apply. The iRobot Roomba 630's dustbin capacity is at 0.5L, dustbin capacity determines how much dust, debris, and pet hair the robot vacuum can hold before it needs to be emptied.
Roborock S6, at 0.5L
has the same dustbin capacity as the iRobot Roomba 630
The dustbin capacity can vary widely among robot vacuum models, and the capcity you choose should be based on your cleaning needs and the size of the area you want to clean. Different floor types require a robot vacuum to be at a given ground clearance so as to optimize performance. iRobot Roomba 630 can adjust its height to match this requirement, for example, it may raise itself slightly when transitioning to a carpet to allow for effective suction, and then lower itself on hard floors to ensure the brushes make good contact.
Automatic height adjustment is commonly found in mid-range to high-end robot vacuum models such as the Roborock S6 with sophiscated sensor technology and adaptability. This feature is essential for maintaining cleaning performance across various floor types, including carpets, rugs, hardwood floors, and tiles. The iRobot Roomba 630 weighs 3.6kg, robot vacuums are commonly designed to be lightweight and compact to easily get around and carrying around.
Roborock S6, at 3.6kg
has the same weight as the iRobot Roomba 630. It's advisable to take in consideration the weight of the vacuum when choosing a model, and that's if you plan to carry it up and down stairs
iRobot Roomba 630 has a width of 340mm, often referred to as its cleaning path width, is the width of the area that the robot vacuum can properly clean in a single pass. The width of a robot vacuum is key as it can affect its efficiency and the duration it takes to clean a space
The Roborock S6, at 350mm
measures more in width than the iRobot Roomba 630 with a difference of 10mm.
A wider cleaning path can cover more ground in a single pass, reducing the time it takes to clean a room. iRobot Roomba 630's height measures 92mm, here you are looking at the measure from the bottom of the robot vacuum to its highest point. Height is a key consideration, especially if you have furniture with limited clearance in your home.
The Roborock S6, at 97mm
measures more in height than the iRobot Roomba 630 with a difference of 5mm. When selecting a robot vacuum, ensure that the robot vacuum can fit under the furniture and navigate effectively in your living space without getting stuck or causing damage. The operating time of the iRobot Roomba 630 refers to the amount of time the vacuum can clean continuously on a single charge before it needs to be recharged.
iRobot Roomba 630's operating time is 2h
The Roborock S6, at 3h
lasts more than the iRobot Roomba 630 by 1h
Always plan cleaning cycles around the vacuum's operating time to maximize efficiency and prevent "incomplete work" between charge intervals. iRobot Roomba 630 has a charge time of 3h, the charge time of a robot vacuum cleaner refers to the amount of time it takes for the vacuum's battery to recharge fully after it has been depleted during a cleaning cycle. This is the amount of electrical power the vacuum uses while it's actively cleaning your home.
iRobot Roomba 630 has a power consumption of 33W, power is typically measured in watts (W) and can vary among different robot vacuum models based on several consuption factors. The Roborock S6, at 58W
consumes more power than the iRobot Roomba 630 with a difference of 25W. Lower power consumption is more energy-efficient and cost-effective over time, but it may also affect cleaning performance, especially on carpets.
iRobot Roomba 630 has a dirt sensor, dirt sensors are designed to detect the concentration of dirt, dust, or debris in the space being cleaned and can be used to adjust the vacuum's cleaning behavior during operation. You may want to consider buying either the Roborock S6 or iRobot Roomba 630 If you prefer the ability to automatically adjust the cleaning modes of the robot vacuum based on the level of dirt and debris in your room. This feature in robot vacuum cleaners is intended to reduce the likelihood of the robot vacuum becoming stuck while cleaning.
Robot vacuums such as the iRobot Roomba 630 are equipped with various sensors and technologies to navigate around obstacles and avoid getting trapped, however the effectiveness of this feature varies among different models. Both the Roborock S6 and iRobot Roomba 630 have the "anti-stuck" feature, but clearing clutter, ensuring proper cable management, and creating clear paths for the vacuums helps to further reduce the chances of becoming stuck while cleaning. Virtual barriers are typically set up and managed via the robot vacuum's mobile app, similar to no-go zones, these barriers are setup to help you control and restrict where the robot vacuum can and cannot go during cleaning.
Both iRobot Roomba 630 and Roborock S6 support virtual barriers, this ability to set virtual barriers is mostly useful for spaces having areas where the robot vacuum may encounter obstacles. Voice prompts refer to notifications that the vacuum emits to give you alerts on the different states of the vacuum. iRobot Roomba 630 supports this feature
Roborock S6 also supports voice prompts, this feature is useful for you who prefer audible notifications or users who have visual impairments.
Auto-docking is a feature in robot vacuum cleaners that refers to the vacuum's ability to autonomously return to its docking station when certain conditions are met such as done with cleaning, battery running low, or any malfunction. Modern robot vacuum cleaners such as iRobot Roomba 630 come equipped with an "anti-fall" feature. This feature is intended to save the robot vacuum from falling off stairs, ledges, or other elevated surfaces, ensuring its safety while cleaning.
This safety feature that is also available on the Roborock S6 is essential in avoiding accidents and protecting the robot vacuum from damage. It gives you peace of mind knowing that the vacuum will not fall off a ledge during its cleaning cycle.
