iRobot Roomba 630 cleans all floor types, this feature comes in handy, as different rooms within a home may have various types of flooring i.e. carpets. If a robot vacuum is advertised as being able to clean all floor types, it implies that the robot vacuum is capable to clean several flooring materials without any limitations.
iRobot Roomba i7+ can also clean all floor types, this means that it too is built to be adaptable, providing effective cleaning performance on either carpets or hard floors commonly found in homes. The iRobot Roomba 630 has 3 cleaning modes, the number of cleaning modes offered by robot vacuums varies widely depending on the design of the robot vacuum. The iRobot Roomba 630 has a period of 1 year, warranty periods for robot vacuums typically range from 1 year to 2 years, however some higher-end models may give longer warranties.
iRobot Roomba i7+, at 1 year
has the same warranty period as that of iRobot Roomba 630. When thinking of buying a robot vacuum cleaner, it's important to read and understand the warranty terms and conditions, as well as any limitations or exclusions that may apply. The iRobot Roomba 630's dustbin capacity is at 0.5L, dustbin capacity indicates how much dust, debris, and pet hair the robot vacuum can hold before it can be emptied.
iRobot Roomba i7+, at 0.4L
carries less dirt than the iRobot Roomba 630 by only 0.1L
The dustbin capacity varies widely among different robot vacuum models, and the capcity you choose should depend on your cleaning needs and the size of the area you want to clean. Different floor types require a robot vacuum to be at a given ground clearance so as to optimize performance. iRobot Roomba 630 adjusts its height to match this demand, for example, it may raise itself slightly when moving to a carpet to allow for effective suction, and then lower itself on hard floors to make sure the brushes make good contact.
The iRobot Roomba 630 weighs 3.6kg, robot vacuums are generally designed to be lightweight and compact for easy maneuverability and portability. iRobot Roomba i7+, at 3.4kg
is lighter than the iRobot Roomba 630 with a difference of 0.2kg. It's important to consider the weight of the robot vacuum when getting a model, and that's if you plan to carry it up and down stairs
iRobot Roomba 630 has a width of 340mm, often referred to as its cleaning path width, is the width of the area that the robot vacuum can properly clean in a single pass.
The width of a robot vacuum is important as it can affect its efficiency and the duration it takes to clean a space
The iRobot Roomba i7+, at 339mm
measures less in width than the iRobot Roomba 630 by 1mm. A wider cleaning path can cover more ground in a single pass, shortening the time it takes to clean a room. iRobot Roomba 630's height measures 92mm, here you are looking at the measure from the bottom to its highest point.
Height is an important consideration, especially if you have furniture with limited clearance in your home. The iRobot Roomba i7+, at 92mm
has the same height as that of iRobot Roomba 630. When selecting a robot vacuum, ensure that the robot vacuum can go under the furniture and navigate effectively in your living space without getting stuck or causing damage.
The operating time of a robot vacuum cleaner refers to the amount of time the vacuum can clean continuously on a single battery charge before it needs to return to its charging dock for recharging. iRobot Roomba 630's operating time is 2h
The iRobot Roomba i7+, at 1.25h
spends less time than the iRobot Roomba 630 with a difference of only 0.75h
Always plan cleaning cycles around the vacuum's operating time to maximize efficiency and prevent "incomplete work" between charge intervals. iRobot Roomba 630 has a charge time of 3h, the charge time of a robot vacuum cleaner refers to the amount of time it takes for the vacuum's battery to recharge fully after it has been depleted during a cleaning cycle.
iRobot Roomba i7+, at 3h
has the same charge time as the iRobot Roomba 630. Charge time is an important factor to consider when choosing a robot vacuum, as it determines how long you'll need to wait before the vacuum begins its next cleaning cycle. This is the amount of electrical power the vacuum uses while it's actively cleaning your home.
iRobot Roomba 630 has a power consumption of 33W, power is measured in watts (W) and changes among different robot vacuum models based on several consuption factors. iRobot Roomba 630 has a dirt sensor, dirt sensors are designed to detect the concentration of dirt, dust, or debris in the room being cleaned and based on their readings adjust the vacuum's cleaning behavior during operation. You may want to consider buying either the iRobot Roomba i7+ or iRobot Roomba 630 If you value the ability to automatically adjust the cleaning modes of the robot vacuum based on the level of dirt and debris in your room.
This feature in robot vacuum cleaners is designed to reduce the chance of the robot vacuum becoming trapped during cleaning. Robot vacuums such as the iRobot Roomba 630 are equipped with various sensors and technologies to move around obstacles and avoid getting stuck, but the effectiveness of this feature can vary among different models. Both the iRobot Roomba i7+ and iRobot Roomba 630 have the "anti-stuck" feature, however clearing clutter, ensuring proper cable management, and creating clear paths for the vacuums helps to further reduce the chances of becoming stuck during cleaning.
These virtual barriers are typically set up and controlled through the robot vacuum's mobile app, similar to no-go zones, these barriers are setup to enable you control and restrict where the robot vacuum can and cannot go while cleaning. Both iRobot Roomba 630 and iRobot Roomba i7+ support virtual barriers, this ability to set virtual barriers is especially useful for spaces having areas where the robot vacuum may become stuck. Voice prompts refer to audible messages that the vacuum states to give you information on the different states of the vacuum.
iRobot Roomba 630 supports this feature
Auto-docking is a feature in robot vacuum cleaners that refers to the vacuum's ability to return to its docking station when certain conditions are met such as getting work done, battery running low, or any malfunction. Both iRobot Roomba i7+ and iRobot Roomba 630 support this feature, considered a convenient feature because it ensures that the robot vacuum keeps its charge and readiness for cleaning with little or no manual intervention. Most robot vacuum cleaners such as iRobot Roomba 630 come equipped with an "cliff detection" feature.
This feature is designed to save the robot vacuum from falling off stairs, ledges, or other elevated surfaces, thus its safety while cleaning. This safety feature that is also available on the iRobot Roomba i7+ is key in preventing accidents and keeping the robot vacuum from damage. It gives you peace of mind by ensuring that the vacuum will not fall off a ledge during its cleaning cycle.
