iRobot Roomba 630 can clean all floor types, this comes in handy, since different rooms within your home may have different types of flooring i.e. carpets. If a robot vacuum cleaner is said to be as being able to clean all types of floors, this means that the vacuum is capable to effectively clean most flooring materials without much significant issues.
iRobot Roomba 630 has 3 cleaning modes, the cleaning modes offered by robot vacuums can vary depending on the design of the robot vacuum. The iRobot Roomba 630 has a period of 1 year, warranty periods typically range from 1 year to 2 years, however some higher-end models may give longer warranty periods. The iRobot Roomba 698, at 2 year
has a longer warranty period than the iRobot Roomba 630 with a difference of 1 year.
When thinking of buying a robot vacuum cleaner, it's essential to read and understand the warranty terms and conditions, as well as any limitations or exclusions that may apply. iRobot Roomba 630's dustbin capacity is at 0.5L, dustbin capacity indicates how much dust, dirt, and pet hair the vacuum can hold before it can be emptied. The iRobot Roomba 698, at 0.6L
has more capacity than the iRobot Roomba 630 with a difference of 0.1L
The dustbin capacity varies widely among robot vacuum models, and the size you choose should depend on your cleaning needs and the size of the area you want to clean.
Different floor types require a robot vacuum to be at a given ground clearance so as to optimize performance. The iRobot Roomba 630 adjusts its height to match this requirement, for example, it may raise itself slightly when moving to a carpet to allow for effective suction, and then lower itself on hard floors to ensure the brushes make good contact. iRobot Roomba 630 weighs 3.6kg, robot vacuums are commonly designed to be lightweight and compact to easily get around and portability.
The iRobot Roomba 698, at 3kg
is lighter than the iRobot Roomba 630 with a difference of 0.6kg. It's important to consider the weight of the vacuum when getting a model, and that's if you plan to carry it up and down stairs
iRobot Roomba 630 has a width of 340mm, aslo known as its cleaning path width, is the width of the area that the robot vacuum can properly clean in one go. The width of a robot vacuum is key as it can affect its efficiency and the duration it takes to clean a room
iRobot Roomba 698, at 340mm
has the same width as that of iRobot Roomba 630.
A wider cleaning path can cover more ground in a single pass, reducing the time it takes to clean a room. iRobot Roomba 630's height measures 92mm, here you are considering the measurement from the bottom to its highest point. Height is a key consideration, especially if you have obstacles with limited clearance in your home.
iRobot Roomba 698, at 92mm
has the same height as that of iRobot Roomba 630. When choosing a robot vacuum, make sure that the robot vacuum can fit under the furniture and navigate effectively in your living space without getting stuck or causing damage. The operating time of a robot vacuum cleaner refers to the amount of time the vacuum can clean continuously on a single charge before it needs to be recharged.
iRobot Roomba 630's operating time is 2h
iRobot Roomba 698, at 1.5h
spends less time than the iRobot Roomba 630 with a difference of only 0.5h
Always plan cleaning cycles around the vacuum's operating time to maximize efficiency and prevent "incomplete work" between charge intervals. iRobot Roomba 630 has a charge time of 3h, the charge time of a robot vacuum cleaner refers to the amount of time it takes for the vacuum's battery to recharge fully after it has been depleted during a cleaning cycle. The iRobot Roomba 698, at 2h
spends lesser time charging than the iRobot Roomba 630 by only 1h.
Charge time is an important factor to consider when choosing a robot vacuum, as it determines how long you'll need to wait before the vacuum begins its next cleaning cycle. This is the amount of electrical power the vacuum uses while it's actively cleaning your home. iRobot Roomba 630 has a power consumption of 33W, power is often measured in watts (W) and changes among different robot vacuum models based on several consuption factors.
iRobot Roomba 630 has a dirt sensor, these are designed to detect the concentration of dirt, dust, or debris in the room being cleaned and based on their readings adjust the vacuum's cleaning behavior during operation. You may want to consider buying either the iRobot Roomba 698 or iRobot Roomba 630 If you value the ability to automatically adjust the cleaning modes of the robot vacuum based on the level of dirt and debris in your room. This feature in robot vacuum cleaners is intended to reduce the likelihood of the robot vacuum getting trapped during cleaning.
Robot vacuums such as the iRobot Roomba 630 are equipped with various sensors and technologies to move around obstacles and avoid getting trapped, but the effectiveness of this feature can vary among different models. Both the iRobot Roomba 698 and iRobot Roomba 630 have the "anti-stuck" feature, however clearing clutter, ensuring proper cable management, and creating clear paths for the vacuums can help further eliminate the chances of getting stuck while cleaning. These virtual barriers are set up and managed through the robot vacuum's mobile app, similar to no-go zones, these barriers are designed to enable you control and restrict where the robot vacuum can and cannot go during cleaning.
Both iRobot Roomba 630 and iRobot Roomba 698 support virtual barriers, the ability to set virtual barriers is especially useful for spaces with areas where the robot vacuum may encounter obstacles. Voice prompts are audible messages that the vacuum states to provide you alerts on the different states of the vacuum. iRobot Roomba 630 supports this feature
Auto-docking is a feature in robot vacuum cleaners that refers to the vacuum's ability to return to its docking station when predetermined conditions are met such as done with cleaning, battery running low, or any malfunction.
Modern robot vacuum cleaners such as iRobot Roomba 630 come having an "cliff detection" feature. This feature is designed to save the robot vacuum from falling off stairs, ledges, or other elevated surfaces, thus its safety while cleaning. This safety feature that is also available on the iRobot Roomba 698 is key in mitigating accidents and protecting the robot vacuum from damage.
It gives you peace of mind knowing that the vacuum will not fall off a ledge during its cleaning cycle.
